Key Won’t Turn In Chrysler Ignition

954-505-2091

Key Won’t Turn In Chrysler Ignition is a very common problem. It also happens in many dodge’s. I will tell you how to get the key to turn and also how to get ignition out to change or fix. This problem is so common We usually get a couple of calls a week on it. After you read this you will at least know how to get it to turn and start the car just in case you have to get some where at that moment and later you can fix it. I also decided to put a video on this page so you really can see how to do it.

Remember you can always call A Lenny Locksmith Sunrise to do this service but it is easy to do and plus its free to do it yourself. Let gets started you will need wd-40, hammer and thats it. Now picture you have the key in the ignition and it just won’t turn. Very scary and frustrating but A A Lenny Locksmith Sunrise will show you how to do it know.

First take key out of ignition and I want you to spray wd-40 in the ignition. That will help your wafers to move easier and make this process easier. Now I want you to put the key in the ignition apply a little pressure with thumb and hit it with a hammer and the key should turn. Now if you are having a problem visualizing that. That is why I made the video.

Now if you want to take ignition out its easy. Once you have the key in the accessories position the is a button under the ignition you press and pull the ignition out. You can either buy a new ignition or call A Lenny Locksmith Sunrise and we can fix it or replace it with a new one.

I hope you enjoyed this blog and feel free to call A Lenny Locksmith for any questions.